Polyron Foam Machining Center / Casting Wood Mold Machining Center Introduction

Polylon foam processing center and casting wood mold processing center are the two main products of our company. In addition, there are also Polylon foam engraving machines, casting wood mold engraving machines, panel furniture CNC router machines, and custom furniture making cnc router machines. 

(1) Can the wood mold machining center process aluminum molds?

Aluminum molds are classified as metal molds, and general customers will use metal engraving and milling machines to process them. If you have to use Polyron foam machining center or wood mold machining center for engraving, the electric spindle can be replaced with a 7.5KW mechanical spindle.

(2) What kind of spindle is used?

Can use domestic 9kw HQD air-cooled spindle or Italy 9kw HSD air-cooled spindle, the performance is very stable.

(3) Which models are available in the Polyurethane Foam Machining Center and Foundry Wood Mold Machining Center? What are the characteristics of each?

① 1325 wood mold is rarely used, and the Z axis stroke is too small, which is generally 600mm.

② 2040 and 3050 use casting table price is about the same, using BT40 spindle, Z axis travel reaches 1.2 meters

③ 1830 and 2030 are more economical and practical. The overall table surface can reach 1.2 meters in Z axis. High configuration, cheap price and high cost performance. The configuration is mainly Taiwan's new generation system, Taiwan Delta servo drive or Japan Yaskawa servo drive.

(4) Is there a dealer?

We mostly do factory direct sales, the level of machine configuration is high, and professionals are required to guide operations and after-sales service, which cannot be solved by general dealers.

(5) The hardness of the wood mold is large. Can the engraving machine be effective?

No problem at all, some customers use CNC engraving machine tools to process FRP. Some customers mainly make aviation supporting products, and the hardness of the products is higher than that of wooden molds. And the customer's comprehensive machining accuracy requirement is within 10 wires, which can meet the customer's requirements.

(6) Is the machine performance of Polylon foam machining center stable?

Polyfoam foam processing center has been popular in the foam mold industry since 2010. Its high efficiency and accuracy make it a popular choice for automotive foam molds. Our company specializes in making Polylon foam machining centers and wood mold machining centers. These CNC machine tools have become our regular products. The machine uses the latest version of Taiwan's new generation control system. This brand has been used in the same industry for more than ten years, and the machine performance is very stable.

(7) Can wooden molds and foam CNC machine tools be similar to five-axis machining center tool magazines?

Wood mold and foam CNC machine tools generally do not make this kind of tool magazine. Generally, the tool magazine of a five-axis machining center is 8-16 milling tools. The installation of the tool magazine is mainly to reduce the tedious process of tool change because of processing different molds. Improve the efficiency of machining centers. However, the general foam and wood mold industries need two types of cutters, rough cutters and fine milling cutters, and there is no need to exchange different types of milling cutters. In addition, the tool change of wood mold and foam CNC machine tools is pneumatic, which is very simple and convenient.