1325 500w CO2 Laser Cutting Machine Delivery
Publish Time: 2025-10-11 Origin: Site
The thickness a CO2 laser can cut depends on its power, with higher power lasers cutting through thicker materials. For example, a low-power laser (like 40W) is suitable for thin materials up to 5mm for acrylic or 6mm for softwood, while a high-power laser (such as 300W+) can cut through thicker materials like 10mm to 20mm wood and up to 40mm acrylic. For metal, CO2 lasers are limited to thin sheets, with power levels of 300W cutting less than 1mm of stainless steel, and higher power lasers needed for thicknesses of a few millimeters.
Key Features of the 1325 500w CO2 Laser Cutting Machines
Power Output & Cutting Capacity.
Precision and Accuracy.
Material Compatibility.
Automation & Software Integration.
Ease of Operation & Maintenance.
General guidelines by material
Acrylic:
40W: Up to 5mm
100W: Up to 18mm (approx. 0.7 inches)
300W+: Up to 40mm
Wood/MDF:
40W: Up to 6mm for softwood
300W+: Up to 20mm
Metal:
300W: Less than 1mm stainless steel
500W: Up to 3mm stainless steel or 6mm carbon steel
1000W: Up to 5mm stainless steel or 10mm carbon steel
Important factors beyond power
Material type: The properties of the material, such as reflectivity and melting point, significantly impact cutting ability.
Cutting speed: A slower cutting speed can compensate for material thickness or achieve a better edge finish, especially for certain plastics.
Multiple passes: For very thick or difficult-to-cut materials, making multiple passes at a lower power setting can improve cut quality.
Gas assist: The use of gases like nitrogen or oxygen can improve cutting efficiency and quality.
Machine calibration: Correct focal length and beam quality are essential for optimal results.
If you'd like to check the working video, get more details and prices, welcome to contact with us now.